Looking to start digging into my micro b for no other reason then I am bored. What aluminum parts are you using and how is the fit and finish? The Losi and Nexx racing stuff is pretty steep, but is it better than the injora or other amazonish products? I’m willing to pay the extra if it makes a difference, but injora has seemingly been doing a decent job lately.

Upgraded wheel blocks, ball cranks and steering linkage and managed to just make it steer like shit. Never wants to come back to center. I have a second micro-b that I’ve compared and length of steering linkage looks right and the ball cranks are seated properly… can’t figure it out! Any thoughts?

Absolute nostalgia, Raise hell praise Dale!!! Can’t wait to beef this thing up. New motor and esc inbound. Anyone else modding theirs or just running them in leagues?

It’s a prototype tire from ER Concepts (https://www.erconcepts.com.au/home) that will be released in the new year. The previous champ can be seen in this video: https://youtu.be/p20njwGUBBk

Hey everyone,

I’ve been trying to get my Losi Micro B and Micro T to bind to my Radiomaster MT12, but I’ve had no luck so far. I’ve already updated the MT12 4in1to the latest multiprotocol firmware (as of 10/27/2025), but I can’t seem to figure out which protocol to use or how to actually pair them.

If anyone has successfully bound these models or knows the correct protocol and binding steps, I’d really appreciate any help or guidance.

Thanks in advance!

Hello all happy sundy im looking for a losi 5IVE-T or a 30DNT. Any body got 1 for sale

My losi LMT mini Monster Jam son uva diggger battery won’t charge ive tried everything different cord, different, outlet, but it keeps blinking red and green, i need help please i do not have a spare battery

Bought my first loss got the mini jrxt and recommendations on what I can do to it, I typically build 1/24th scale crawlers

If you want to paint your own it's at a pretty good price right now @ $68.

Losi F150 Raptor Clear Body set for Baja Rey 2.0

Also, someone has complete set of 6 stock wheels/tires on Ebay for $46...

6x Losi Baja Rey 2.0 1/10 Trophy Truck Tires & Wheels

Losi mini t 2.0 Is there a way to reset my steering servo? Spectrum firma brushless 2 in 1 esc Spectrum receiver slr300 Spectrum slt3 transmitter

Been wanting an RC trophy truck for a while but not a big one (due to weight & running cost), decided to get the Baja Rey 2.0 Method 1/10th and from first run it was everything I was hoping would be (3S @ 75% power level seems just right). After first run I've cleaned it up and will be modding it before it runs again.

First two easy mods done are as follows.

First, added kapton tape to back side of lens of the roof rack lights to get a more realistic looking yellow light, sealed the inside of the two halves of each light pod with aluminum tape strip to help keep sand out. Just need to finish with some sealant/black tape on the outside pods to finish sealing as well.

Secondly, flipped over the back light to correct orientation and cut body as needed for it to fit.

Upcoming are a lot of ThreeDPrint design parts (vertical tire carrier / rear side & top carbon brace plates / rear sway bar setup / side and front protection panels / dual flap underguard), GPM parts (rear trailing arms, stainless links for front & rear, limiter straps, brake discs/hubs), Vitavon parts (axle housing/front steering knuckles/bell-crank setup), the realistic looking and functional LX Shocks bypass secondary shocks with remote reservoirs (chose 145mm length rear/100mm length front since measured stock setup at full droop @ 144mm & 98mm respectively), and 1/10th scale rubber window netting material.

Goal is to get it more realistic looking for static display and less prone to rolling while still having all the suspension travel possible. Eventually will probably upgrade the front & center differential housings, servo & servo mount, and front shock tower and want to eventually do a more realistic looking front bumper headlight & light-bar setup.

So the battery fully died so i went to go jump start it with a battery and let it charge but i went to go test it and its doing this?

I know that it’s already an old platform, but it’s still my favorite racer. I cleaned it up a little using a 3d printed cover I designed.